24 25
QuikCapture is the fastest way to capture video or time lapse photos with
Fusion. Because the camera is powered on only when it is capturing, you
also conserve battery power.
To capture other types of content, see Capturing Video and Photos (page
26).
CAPTURING VIDEO WITH QUIKCAPTURE
1. With the camera powered o, press the Shutter button [
].
Your camera powers on, beeps several times, and automatically begins
capturing video. The camera status lights blink while the camera is
recording. The default video resolution is 5.2K30.
2. To stop recording, press the Shutter button [
] again.
The camera stops recording, beeps several times, and automatically
powers o.
QUIKCAPTURE
CAPTURING TIME LAPSE WITH QUIKCAPTURE
The Time Lapse mode is perfect for showing how a scene changes over
time. With Time Lapse Photo or Night Lapse Photo, you can capture a
series of photos to be sure you get the shot you want.
1. With the camera powered o, press and hold the Shutter button
[
] until capture begins.
3 sec
Your camera powers on, beeps several times, and automatically begins
capturing in the current Time Lapse capture mode (Time Lapse Video,
Time Lapse Photo, or Night Lapse Photo). The camera status lights
blink once for each photo captured.
2. To stop capturing, press the Shutter button [
] again.
The camera stops recording, beeps several times, and automatically
powers o to maximize battery life.
TURNING QUIKCAPTURE OFF
QuikCapture is on by default. To turn it o, connect Fusion to the
GoPro app and turn o QuikCapture in the settings list. For details, see
Connecting to Other Devices (page 33).
QUIKCAPTURE
To Next Page
Loading...
Need help?
General
