GoPro Fusion - Important Messages and Icons; Temperature Message: Too Hot; File Repair Icon; MicroSD Card Messages

56 57
Fusion alerts you whenever there is an issue with the camera or microSD
cards. The most important messages that you might see are listed below.
TEMPERATURE MESSAGE
TOO HOT -
SHUTTING
DOWN
A message appears on the status screen when the
camera becomes too hot and needs to cool down.
Simply let it sit and cool before attempting to use
it again. Your camera was designed to identify
conditions of overheating and shuts down when
needed.
FILE REPAIR ICON
FILE
DAMAGED
If recording stopped abruptly and the video le
was not properly saved, the le might become
corrupted. If this happens, the camera displays a
FILE DAMAGED message. Press the Shutter button
to repair the le. When this process is nished, you
receive a message stating whether the repair was
successful or failed. Press any button to continue
using the camera.
MICROSD CARD MESSAGES
NO SD
No card present. The camera requires a microSD,
microSDHC or microSDXC card (sold separately) to
capture videos and photos. The message indicates
which card is missing.
SD CARDS
FULL
The cards are full. Delete some les or insert dierent
cards.
SD ERROR
The camera is unable to read the card formatting.
Reformat the cards in the camera.
IMPORTANT MESSAGES RESETTING YOUR GOPRO
RESTARTING YOUR GOPRO
If your camera is not responding, press and hold the Mode button [ ]
for 8 seconds to shut down the camera and then restart it. All settings
are retained.
RESETTING ALL SETTINGS TO THE DEFAULTS
This option resets all of your camera settings to the defaults, except Date,
Time, and your camera’s username and password.
1. Connect Fusion to the GoPro app.
2. Open the settings, and then tap Reset Defaults. For details, see
Connecting to Other Devices (page 33).
RESETTING THE CONNECTIONS
This option clears your connections list and resets the camera's
password. If you reset the connections, you must reconnect any desired
devices to your GoPro.
1. Press the Mode button [
] repeatedly until you get to Settings
[ ], then press the Shutter button [ ] to select it.
2. Press the Shutter button [ ] repeatedly until you get to
Connections [ ].
3. Press the Mode button [ ] repeatedly until you get to Reset, then
press the Shutter button [ ] to select it.
4. Press the Mode button [ ] to highlight Reset, then press the
Shutter button [ ] to select it. Fusion automatically resets the
connections and powers o.