Gowei G1pro - Confirmation Tones and Vibra Alerts

Vibra Alert
Roger Beep Confirmation Tone
HI
Vibration OFF
Confirmation Tone ON
HI
Confirmation Tone OFF
HI
HI
Vibration ON
Your radio can alert you to incoming signals by sounding an audible call tone
or an audible tone with Vibra Alert.
To Vibra Alert mode on or off
Your listener will hear an audible tone when you release the PTT button.
This alerts the other party that you have finished talking and it is OK for them to
speak.
1.
2.
3.
Roger Beep Confirmation Tone on or off:
Press the MENU button until the icon shown on
the display. The current on or off setting is displayed.
Choose one of the following:
Press the MENU
button to enter the new setting and
proceed to other functions.
Press the PTT button to return to Standby mode.
Do not press any buttons for 10 seconds to return to
Standby mode.
a.
b.
c.
Press the or button to Turn Roger Beep
Confirmation Tone on or off.
1.
2.
3.
Press the MENU button until the icon shown on
the display. The current on or off setting is displayed.
Choose one of the following:
Press the MENU
button to enter the new setting and
proceed to other functions.
Press the PTT button to return to Standby mode.
Do not press any buttons for 10 seconds to return to
Standby mode.
a.
b.
c.
Press the or button to Turn Vibra Alert on or
off.
-17