GPRINTER GP-2120T - 6. Quick Start; 6.2 Power Cable Connection; 6.3 Data Cable Connection; 6.4 Media Installation

THERMAL BARCODE PRINTER SERIES 7
8. REFERENCE
Description
This command defines the reference point of the label. The reference (origin)
point varies with the print direction, as shown:
Syntax
REFERENCE x, y
Parameter Description
x Horizontal coordinate, with “dot” as the unit.
y Vertical coordinate, with “dot”as the unit.
Note: 203 DPI: 1 mm = 8 dots
Example
REFERENCE 10,10
See Also
DIRECTION
y
x
y
x
Direction 0