THERMAL BARCODE PRINTER SERIES 68
Device Reconfiguration Commands
66. SET COUNTER
Description
Counter can be a real counter or a variable.
This setting sets the counter number in program and their increments.
There are three different kind of counters: digit (0~9~0), lower case letter
(a~z~a) and upper case letter (A~Z~A).
Syntax
SET COUNTER @n step
@n = “Expression”
Parameter Description
@n n: counter number. There are 51 counters available
(@0~@50) in the printer.
step The increment of the counter, can be positive or
negative.
-999999999<= step <=999999999
If the counter is used as a fixed variable, please set
the increment to 0.
Expression Initial string. String length is 101 bytes
Example
SIZE 3,3
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET COUNTER @1 1
@1="00001"
SET COUNTER @2 5
@2="AB000001"
CLS
TEXT 50,50,"3",0,1,1,@1
BARCODE 50,100,"39",48,1,0,2,4,@2
PRINT 2,1
See Also
PRINT, TEXT, BARCODE
To Next Page
Loading...
