GPRINTER GP-2120T - Files

THERMAL BARCODE PRINTER SERIES 38
39. FILES
Description
This command prints out the filenames (or lists the files through RS-232)
that remained in the printer memory (both FLASH memory and DRAM). The
total memory size and available memory size are printed out or lists as well.
Syntax
FILES
Example
Follow the steps below to print out (or lists the files through RS-232) the files
that are saved in printer memory in DOS environment through serial port or
parallel port connection.
C:\>MODE COM1 96,N,8,1<ENTER>
C:\>COPY CON COM1<ENTER>
FILES<ENTER>
<CTRL><Z><ENTER>
C:\>
Or
C:\>COPY CON LPT1<ENTER>
FILES<ENTER>
<CTRL><Z><ENTER>
Note: <ENTER> stands for PC keyboard “ENTER” key.
<CTRL><Z> means to hold PC keyboard “CTRL” key then press
the PC keyboard <Z> key.
See Also
~!F, KILL