THERMAL BARCODE PRINTER SERIES 35
File Management Commands
37. DOWNLOAD
Description
“DOWNLOAD” is a header of the file that is to be saved in the printer's
memory.
The downloaded files can be divided to two categories: program file and data
file (including text data file, PCX graphic files and bitmap font file)
The detailed descriptions regarding the download syntax for different files
are shown below:
Maximum numbers of file saved in DRAM:
256 files.
Maximum numbers of file saved in Flash memory:
256 files
Printers will execute the program automatically when turning on power, if
one of the downloaded programs is named “AUTO.BAS”. To disable the
auto execution function, please follow the procedures below.
Syntax
1. Download a program file
DOWNLOAD [n,]“FILENAME.BAS”
Parameter Description
n Specify the memory which is used to save the
download files.
n is ignored Download files to DRAM only. If you would like to
save the files from DRAM to Flash memory
before turning off power, you can issue MOVE
command to printer to move the files from DRAM
to Flash memory.
F: Download files to main board flash memory.
FILENAME.BAS The filename resident in printer memory.
Note:
(1). The filename is case sensitive.
(2). The extension of the program file must be “.BAS”
(3). Filename format must be in 8.3 format.
(4). If memory is not specified, all files will be downloaded to
DRAM.
No Battery is used to backup DRAM. The downloaded files
in DRAM will be lost in case turns off printer power.
To Next Page
Loading...
