GPRINTER GP-2120T - Cls; Feed

THERMAL BARCODE PRINTER SERIES 10
11. CLS
Description
This command clears the image buffer.
Syntax
CLS
Parameter Description
None N/A
Note: This command must be placed after SIZE command.
Example
CLS
See Also
SIZE, GAP
12. FEED
Description
This command feeds label with the specified length.
The length is specified by dot.
Syntax
FEED n
Parameter Description
n unit: dot
1 ≤ n ≤ 9999
Example
FEED 40
Note: 203 DPI: 1 mm = 8 dots
See Also
BACKFEED, SIZE, GAP, HOME, FORMFEED