31
Download History Data
1. Turn on the Save Data feature on the EMF-390 and wait for a while to save enough data to be
downloaded.
2. Run the EMF-PRO from Windows. The software will automatically scan and detect the EMF-390.
The Auto button is used to detect the EMF-390 again. If the EMF-PRO does not detect the
EMF390, make sure the USB driver is installed and loaded correctly after connect the EMF-390 to
a Windows.
3. You should be able to see the EMF-390 screen from EMF-PRO.
4. Select Download history from File menu and let software know where to save the .csv file, then
click on the Download button to start download.
5. The progress bar shows how much data been downloaded. The whole data history takes about 3
to 5 minutes to complete the download.
To Next Page
Loading...
Need help?
General
