Dispense
22 313046A
1. To TOP OFF, press the center ENTER button on the
meter’s keypad to select TOP OFF on the display
(the cursor will automatically be positioned over this
option when the meter clicks off).
2. Squeeze trigger to dispense additional fluid.
The amount dispensed on the display will continue
to count up. Unless there is a preset limit on the
amount you are allowed to top off and you have
reached the limit, you can squeeze the trigger again
to dispense more fluid.
To end the TOP OFF release trigger. The cursor will
be over the END option on the display.
3. Use the center ENTER button on the meter’s key-
pad to select END on the display.
The meter sends the dispense report to the PC.
END
If you do not need to dispense additional fluid, use the
LEFT ARROW to move the cursor to END on the
display. Press center ENTER button on the meter’s
keypad to confirm the selection.
The meter sends the dispense report to the PC.
Restricted Preset Dispense
When meters are programmed in restricted preset
mode, the specified dispense value cannot be
increased, only decreased. The functionality of this
feature is identical to Preset Dispense Mode except that
the preset value can only be decreased with the DOWN
ARROW.
To Next Page
Loading...
