Startup
22 334558D
Spray
1. Spray test pattern. Increase pressure to
eliminate heavy edges. Use smaller tip
size if pressure adjustment can not
eliminate heavy edges.
2. Hold gun perpendicular, 10-12 in.
(25-30 cm) from surface. Spray back
and forth. Overlap by 50%. Trigger gun
after moving and release before stop-
ping.
Clear Tip Clog
1. Release trigger, engage trigger lock.
Rotate Switch Tip. Disengage trigger
lock. Trigger gun to clear clog.
2. Engage trigger lock. Return Switch Tip
to original position. Disengage trigger
lock and continue spraying.
To Next Page
Loading...
