Graco GrindLazer 480 - 10 In. (25 CM) Fine Cut Flail Cutters; 90 Spacers; 174 Cutters

Cutter Stacking Recommendations
3A0102D 25
10 in. (25 cm) Fine Cut Flail Cutters
90 Spacers / 174 Cutters
INSTRUCTIONS: Rotate sequence 180° and repeat for
remaining shafts.
(S) Spacer
(C) Carbide Cutter
1 (S)
1 (C)
1 (S)
1 (S)
3 (C)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
ti15050a
ti15053a
1 (S)
1 (S)
1 (S)
2 (S)
1 (C)
1 (C)
1 (C)
1 (C)
1 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (C)
2 (S)
1 (S)
16 (C)
1 (S)
1 (S)
19 (C)
2 (S)
NOTE: Assembly may vary due to tolerances.
Stack cutters and spacers so the drum is properly
balanced to prevent excessive vibration.