Graco GrindLazer 480 - In. (15 CM) Full Cut Flail Setup 258 Spacers; 84 Cutters

Cutter Stacking Recommendations
3A0102D 29
6 in. (15 cm) Full Cut Flail Setup
258 Spacers / 84 Cutters
INSTRUCTIONS: Rotate sequence 180° and repeat for
remaining shafts.
(S) Spacer
ti15056a
(S) Spacer (C) Cutter
1 (S)
1 (C)
1 (S)
1 (C)
15 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
13 (S)
1 (C)
1 (S)
2 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
15 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
13 (S)
1 (C)
1 (S)
2 (S)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (S)
1 (C)
1 (C)
ti25374a
NOTE: Assembly may vary due to tolerances.
Stack cutters and spacers so the drum is properly
balanced to prevent excessive vibration.