Graco GrindLazer 480 - In. (15 CM) Cut Carbide Millers 204 Spacers; 30 Cutters

Cutter Stacking Recommendations
26 3A0102D
6 in. (15 cm) Cut Carbide Millers
204 Spacers / 30 Cutters
INSTRUCTIONS: Rotate sequence 180° and repeat for
remaining shafts.
(S) Spacer
(M) Miller
ti15056a
14 (S)
1 (M)
1 (M)
1 (M)
1 (M)
15 (S)
1 (S)
1 (S)
1 (S)
1 (S)
15 (S)
1 (M)
1 (M)
1 (M)
1 (M)
3 (S)
1 (S)
1 (S)
4 (S)
14 (S)
ti15096a
1 (M)
1 (S)
1 (M)
NOTE: Assembly may vary due to tolerances.
Stack cutters and spacers so the drum is properly
balanced to prevent excessive vibration.