Graco GrindLazer 480 - 10 In. (25 CM) Cut Carbide Millers; 66 Spacers; 54 Cutters

Cutter Stacking Recommendations
28 3A0102D
10 in. (25 cm) Cut Carbide Millers
66 Spacers / 54 Cutters
INSTRUCTIONS: Rotate sequence 180° and repeat for
remaining shafts.
1 (S)
1 (S)
1 (M)
1 (M)
1 (S)
1 (S)
1 (M)
1 (S)
1 (M)
1 (S)
1 (M)
1 (S)
1 (M)
1 (S)
1 (S)
1 (M)
ti15052a
(S) Spacer
(M) Miller
ti15056a
1 (S)
1 (M)
1 (M)
1 (M)
1 (M)
1 (M)
1 (M)
1 (M)
1 (S)
1 (S)
1 (S)
1 (S)
1 (S)
1 (S)
1 (S)
1 (S)
1 (S)
1 (M)
1 (S)
1 (M)
1 (M)
1 (S)
1 (S)
1 (M)
NOTE: Assembly may vary due to tolerances.
Stack cutters and spacers so the drum is properly
balanced to prevent excessive vibration.