Graco Husky 2200 - G R a C O S T a N D a R D H U S K y P U M P W a R R a N T

Technical Data
Maximum pump speed
Standard diaphragms
125 cycles per minute
Overmolded diaphragms
155 cycles per minute
Weight
Polypropylene 80 lb 36.3 kg
PVDF 106 lb 48.1 kg
Wetted Parts
Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of
construction: Polypropylene or PVDF
Non-wetted externa l parts stainl es s ste el, polyp ropy le ne
Fluid Temperature Range
US Metric
Diaphragm/Ball/Seat Material
Polypropylene
Pump
PVDF Pump Polypropylene
Pump
PVDF Pump
FKM Fluoroelastomer
32° to 150° 32° to 225° 0° to 66° 0° to 107°
Polypropylene
32° to 150° 32° to 150° 0° to 66° 0° to 66°
PTFE overmolded diaphragm
40° to 150° 40° to 180° 4° to 66° 4° to 82°
PTFE check balls
40° to 150° 40° to 220° 4° to 66° 4° to 104°
PVDF
32° to 150° 32° to 225° 0° to 66° 0° to 107°
Santoprene 32° to 150° 32° to 180° 0° to 66° 0° to 82°
2–piece PTFE/Santoprene
diaphragm
40° to 150° 40° to 180° 4° to 66° 4° to 82°
3A2714G 33
www.northridgepumps.com