Graco LineLazer 130HS - Fan Belt

313776 13
Fan Belt
Removal
1. Relieve pressure; page 7.
2. Fig. 3. Loosen belt guard knob (241).
3. Rotate belt guard (24) up.
4. Lift engine (185) up to remove tension on belt
(143).
5. Remove belt from fan pulley (86) and fan pulley
(87a).
Installation
1. Thread belt (143) around fan pulley (87a) and fan
pulley (86).
2. Lower engine (185) to put tension on belt.
3. Rotate belt guard (24) down.
4. T ighten belt guard knob (241).
Fig. 3
ti6511a
241
185
24
86
87a
143