31377614
Engine
Removal
1. Relieve pressure; page 7.
2. Do Fan Belt, Removal; page 13.
3. Loosen hand nut (241). Swing bracket (30) out.
4. Fig. 4. Disconnect red and black leads from engine
(185).
5. Remove engine and rocker plate (87c) from spray-
er.
6. Remove four screws (189), washers (114), wash-
ers (170) and nuts (118) and remove rocker plate,
dampeners (59) and washers (114) from engine.
Installation
1. Install rocker plate (87c), dampeners (59) and
washers (170), washers (114) on engine (185)
with four screws (189), washers (170) and nuts
(118); torque to 20 ft-lb (27.1 N·m).
2. Install engine and rocker plate (87c) on sprayer.
3. Connect red and black leads.
4. Do Fan Belt, Installation; page 13.
5. Swing motor retainer bracket (30) in. Tighten hand
nut (241).
GREEN
BLACK
Fig. 4
NOTE: All service to the engine must be
performed by an authorized HONDA dealer.
189
30
241
114
59
170
118
114
87c
RED
To Next Page
Loading...
