Technical
Data
Engine 5.5
Horsepower
, Honda
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum
W
orking Pressure
3000 psi (207 bar
, 20.7 MPa)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Noise
Level
Sound Power
105 dbA
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound
Pressure
97 dbA @ 1 meter under maximum operating conditions
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
per
ISO–3744
Cycles/Gallon (liter)
200 (53).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum
Delivery
1.25 gpm (4.7 liter/min)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel T
ank Capacity
0.95 gallons (3.6 liter)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum T
ip Size
1 gun with 0.035 tip;
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
guns with 0.025 tip
3 guns with 0.019 tip
Inlet Paint Strainer
16 mesh (1
190 micron)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stainless
Steel screen, reusable
Outlet Paint Filter
60 mesh (250 micron)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stainless
Steel screen, reusable
Pump Inlet Size
3/4 npt (m).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid
Outlet Size
1/4 npsm from fluid filter
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted
parts
Displacement Pump
Zinc-Plated Carbon Steel, Stainless Steel,
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chrome-Plated
Stainless Steel, Polyethylene,
T
ungsten Carbide, Leather
, Polyurethane
Filter
Zinc-Plated Carbon Steel, Stainless Steel
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight (dry
, without packaging)
237 lb (107 kg)
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Height 40 in. (1016 mm).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length 56 in. (1422 mm).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width 37 in. (940 mm).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories
USE ONL
Y
GENUINE GRACO
P
AR
TS AND ACCESSORIES
French 185–956
Spanish 185–961
German 186–041
Greek 186–045
Korean 186–049
English 185–953
Apply
other
language here
0057
DANGER
LABELS
The English language DANGER label shown on
page
1 is also on your
sprayer
. If you have painters
who
do not read English, order one of the following
labels to apply to your sprayer.
The drawing below
shows the best placement of these labels for good
visibility. Order the labels directly from Graco, free
of
charge.
T
oll Free:
1–800–328–0211
DISPLACEMENT PUMP REP
AIR Kit 222–588
See contents on page 42. Repair instructions are in-
cluded
with the kit.
FLEX GUN REP
AIR KIT
235–474
Includes needle, gasket, dif
fuser/seat.
LINE GUIDE POINTER
W
orks only with Second Gun and Hose Kit 224–097.
Order One each of the following:
100–538 Screw
181–735
Indicator Holder
181–730
Line Indicator
SLEEVE REMOV
AL TOOL 224–787
Required for removing the sleeve of the displacement
pump
during service.
THROA
T SEAL LIQUID
Non–evaporating liquid for the wet–cup. Helps prevent
buildup
of paint on the rod and throat
packings, to reduce
premature
wear
.
206–994
8 oz.
206–995
1 quart
206–996
1 gallon
To Next Page
Loading...
