Shutdown and Cleaning
16 312001B
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
13. While continuing to
trigger gun, quickly move
gun to redirect spray into
waste pail. Continue
triggering gun into waste
pail until flushing fluid
dispensed from gun is
relatively clear.
14. Stop triggering gun. Engage
trigger lock.
15. Turn power switch OFF.
16. Clean InstaClean Fluid Filter and gun, page 19.
17. Fill unit with Pump Armor
™
storage fluid. Read Long
Term Storage, page 20.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
Step 12 is for returning paint in hose back to paint
pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
ti8909a
ti9345a
TIA
ti9745a
ti8908a
WLD
To Next Page
Loading...
Need help?
General
