Shutdown and Cleaning
18 312001B
16. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with water starting to come out of gun.
17. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering
gun into waste pail until
water coming out of gun is
relatively clear.
18. Stop triggering gun. Engage
trigger lock.
19. Turn power switch OFF.
20. Turn off garden hose. Close
Power Flush attachment.
21. Unscrew Power Flush
attachment from suction tube.
22. Clean InstaClean Fluid Filter and gun, page 19.
23. Fill unit with Pump Armor
™
storage fluid. Read Long
Term Storage, page 20.
Step 16 is for returning paint in hose back to paint
pail. One 50-ft (15-m) hose holds approximately
1-quart (1-liter) of paint.
ti8909a
ti9345a
TIA
ti9745a
ti8908a
WLD
ti9413a
TIA