Pump Test
310665E 25
6. Compare fluid amounts in the containers; they
should be about equal. Repeat test if fluids are not
equal. If problem persists, see Troubleshooting in
Xtreme Mix 185 Repair Manual.
4. Dispense fluid B as follows:
a. Place a clean 1 quart (1000 cc) container under
sampling valve H
B
.
b. Slowly open and adjust sampling valve H
B
to
achieve desired flow. The pump stops automati-
cally after 5 cycles. Indicator B turns off.
5. Close sampling valve H
B
.
If pump fails any of pump stall tests, alarm will dis-
play (see alarms 15-20, page 34).
To Next Page
Loading...
Need help?
General
