Graco Reactor A-20 Repair Parts

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2006, Graco Inc. is registered to I.S. EN ISO 9001
311512A
Repair - Parts
Reactor A-20
For spraying or dispensing 1:1 mix ratio materials, including epoxies, and
polyurethane foam. Not for use in explosive atmospheres.
253831 Air operated, electrically heated, plural component
proportioner.
This model is field-configurable to the following supply voltages:
230 V, 1 Phase
230 V, 3 Phase
380 V, 3 Phase
2,000 psi (14 MPa, 140 bar) Maximum Fluid Working Pressure
120 psi (0.84 MPa, 8.4 bar) Maximum Air Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
ti8447a

Graco Reactor A-20 Specifications

General

Brand	Graco
Model	Reactor A-20
Category	Paint Sprayer
Language	English