Repair-Parts
Air operated, electrically heated, plural component proportioner
A-25: For spraying or dispensing 1:1 ratio polyurethane foam formulations and other
1:1 fast setting materials.
A-XP1: For spraying or dispensing 1:1 ratio polyurea formulations and other 1:1 fast
setting materials.
Not for use in explosive atmosphere or hazardous locations.
This model is field-configurable to the following supply voltages:
200-240 VAC, 1 Phase
200-240 VAC, 3 Phase
350-415 VAC, 3 Phase
A-25:
2000 psi (14 MPa, 138 bar) Maximum Fluid Working Pressure
80 psi (550 kPa, 5.5 bar) Maximum Air Working Pressure
A-XP1:
3500 psi (24 MPa, 241 bar) Maximum Fluid Working Pressure
100psi (689 kPa, 6.9 bar) Maximum Air Working Pressure
See page 3 for model information,
including maximum working pressure and approvals.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
3A1570L
EN
To Next Page
Need help?
General
