Graco RoadLazer RoadPak - Begin to Spray

Operation
28 3A5384B
Turn on Bead System
1. To pressurize the bead tanks, turn bead system
valve to ON position.
2. Set desired bead tank pressure by turning regulator
knob.
3. Remove and secure ground strap from earth
ground.
4. System is now ready for painting. Select guns with
the Programmable Skipline Controller.
Begin to Spray
Select appropriate procedure from menu on RoadLazer
control system. See Skipline Controller manual.
ti16549a
+
ti16910a