Shutdown
3A0232ZAA 21
Shutdown
Daily Shutdown
1. Perform Pressure Relief Procedure.
2. Solvent flush at 80-100 psi (550-700 kPa,
5.5-7.0 bar) for five seconds.
3. Loosen then remove air cap retaining ring.
4. For internal mix guns, remove mixing element.
5. Remove front head.
NOTICE
Failure to perform this procedure correctly and accord-
ing to the prescribed schedule can result in poor mix-
ing, fluid leaking, and cured material in or on the gun.
To Next Page
Loading...
