Access Auto Display Screens
407061B 7
Potlife Simulation
The Potlife screen is not available unless the potlife
timer is enabled. To enable the potlife timer complete
the following steps.
1. Enter Setup mode by navigating to the Alarm Infor-
mation screen then pressing the UP arrow. The
Home Setup screen displays.
2. Press from the Home Setup screen.
3. Press to scroll down and highlight .
4. Press to enable the potlife timer.
5. Press to return to the Home Setup screen.
6. Exit Setup Mode to access the Potlife screen: Navi-
gate to the Version Control screen then press the
UP arrow. The Power On/Enter Mode screen dis-
plays.
7. Press to view the Potlife screen.
This screen simulates that a potlife advisory alarm has
been activated.
8. Press to exit and return to the Power
On/Enter Mode screen.
Home
Power On/Enter Mode
To Next Page
Loading...
