Component Identification - ThermoLazer ProMelt
12 3A1319K
Component Identification - ThermoLazer ProMelt
*LP-Gas supply cylinder not supplied by Graco. LP-Gas supply cylinder must be designed, fabricated, and marked in
accordance with specifications and regulators for LP-Gas cylinders at The U.S. Department of Transportation (DOT),
The National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous
Goods, The Transportable Pressure Vessels Regulators 2001 (S1 2001/1426), The Gas Cylinders (Pattern
Approval) Regulations 1987 (SI 1987/116)(Pattern Approval Regulations) for EEC-type cylinders under European
Directive 84/525/EEC, 84/526/EEC, and 84/527/EEC.
ti24934a
U
N
S
R
AB
M
K
H
T
V
J
ALC
Z
W
P
X
A Kettle Main Burners (2)
C Kettle Pilot Burner
H Line Guide
J LP Gas Cylinder Holder
K Screed Box Lever
L Kettle Thermopile
M Bead Dispenser Box
N Screed Box/Bead Dispenser Box Actuator
P SplitBead Hopper
R ControlFlow Gate Valve
S ControlFlow Gate Valve Actuator
T FatTrack Swivel Tire
U Front Swivel Wheel Unlock Lever
V Kettle Pilot Igniter Electrode
W Access Cover with Latches
X Agitator Actuator
Z Agitators
AB Torch
To Next Page
Loading...
