Graco ThermoLazer 300TC - Component Identification - ThermoLazer 200

Component Identification - ThermoLazer 200
6 3A1319K
Component Identification - ThermoLazer 200
*LP-Gas supply cylinder not supplied by Graco. LP-Gas supply cylinder must be designed, fabricated, and marked in
accordance with specifications and regulators for LP-Gas cylinders at The U.S. Department of Transportation (DOT),
The National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous
Goods, The Transportable Pressure Vessels Regulators 2001 (S1 2001/1426), The Gas Cylinders (Pattern
Approval) Regulations 1987 (SI 1987/116)(Pattern Approval Regulations) for EEC-type cylinders under European
Directive 84/525/EEC, 84/526/EEC, and 84/527/EEC.
ti22640b
Q
R
P
L
K
J
F
E
C
G
H
D
B
W
A
X
U
T
S
V
M
N
ZZ
A Kettle Main Burner
B Front Screed Box Burners
C Flame Indicator
D Screed Box (FlexDie)
E Rear Screed Box Burners
F Bead Dispenser Box
G Rear Swivel Wheel
H Rear Swivel Unlock Lever
J Front Screed Box Manual Shut-Off
K Rear Screed Box Manual Shut-Off
LTorch
M Screed Box/Bead Dispenser Box Actuator
N
ControlFlow
™
Gate Valve Actuator
P Propane Tank Connector
Q Bead Hopper
R LP Gas Cylinder Holder
S Access Cover
T Agitator Crank
U Kettle
V ControlFlow Gate Valve
W Line Guide
X Agitator
ZZ Kettle Lid Lock