Graco ultra max ii User Manual

Pressure Control Board
32 311365H
Installation
1. Install o-ring (20) and transducer (86) in filter
base (67). Torque to 35-45 ft-lb (47-61 N•m).
Install grommet onto transducer (86) and
transducer into control box.
2. Connect transducer connector (E) to motor
control board (95).
3. Install control box (61) and control panel (68)
with four screws (39).
4. Connect potentiometer connector (C) to motor
control board.
5. Install cover (96) with four screws (38).
ti7447a
40
67
20
86
ti13496a
E
95
ti12999a
ti7458a
39
61
68
ti13494a
C
ti12997a
38
96
ti13493a

Graco ultra max ii Specifications

General

Max Pressure	3300 PSI
Motor	Oilless, axial cam
Series	Ultra Max II
Power Source	Electric
Voltage	120V
Hose Length	50 ft
Type	Airless
Max Tip Size	0.017 inches
Spray Tip Size	0.009 - 0.017 inches