32
- Packaging materials must not be used for playing. There is a dan-
ger of suffocation.
- In the absence of supervision and prior to assembly, disassembly
or during cleaning, always disconnect the unit from the mains.
- After a continuous operation of 10 minutes, let the motor cool
down for an hour.
- This unit must be used with carriage and end-piece holder in nor-
mal operating condition, unless the size and shape of the slicing
material do not permit their use.
- Clean the unit, the end-piece holder, the MiniSlice attachment and
the carriage using a damp cloth or a mild cleaning agent.
- Clean the Blade with a damp cloth. Caution: risk of injury!
- KEEP THE OPERATING INSTRUCTIONS.
Danger caused by electric current
Mortal danger is caused by contact with energised cables or com-
ponents!
Please observe the following safety instructions in order to prevent
an exposure to electric current:
- Do not use the unit if the mains cable or plug are damaged.
- In this case, you should let the Graef Customer Service install a
new connection cable before using the appliance again. This
may be done also by an authorised specialist.
- Do not open the housing under any circumstances. If live connec-
tions are touched or the electrical and mechanical construction
are modified, there is the danger of electric shock.
- Never touch live parts. This can cause an electric shock and may
cause even death.
Safety instructions for the electrical connections
For safe and fault-free operation of the unit, the following require-
To Next Page
Loading...
