BioCompact II 410 BioCompact II 610
50
Defrost water
The cabinet creates defrost water, that is directed out into a re-evaporation tray at the back of the cabinet.
BioCompact II 610
Defrost water is led through a tube in the insulation to a re-evaporation tray at the back of the cabinet.
BioCompact II 210, 310, 210/210, 310/210, and 410
Defrost water is led through a tube in the insulation to a re-evaporation tray in the compressor room in the cabinet.
Below the re-evaporation trays for a BioCompact II 410 and BioCompact II 610 are shown.
It is recommended that the re-evaporation tray is checked regularly for foreign objects and cleaned accordingly. This shall
only be done while the cabinet is turned o.
Be careful not to damage the defrost water tube and heating element (located in the tray) when cleaning.