Menu Voice Prompt User’s Options
Main
Menu
“Enter a Menu Option”
Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter “001 – 005,007, 010, 013 – 017,047, 086 or 099” Menu option
Enter “9” for confirming an option
001
“DHCP Mode”,
“PPPoE Mode” or
“Static IP Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP address information
through menu 002 to 005. If user selects “Dynamic IP Mode”, the device will retrieve all
IP address information from DHCP server automatically when user reboots the device.
002
“IP Address “ + IP
address
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
003 “Subnet “ + IP address Same as Menu option 002
004
“Gateway “ + IP
address
Same as Menu option 002
005
“DNS Server “ + IP
address
Same as Menu option 002
007 Preferred Vocoder
Enter “9” to go to the next selection in the list:
PCMU
PCMA
iLBC
G-726
G-723
G-722
G-729
010 “MAC Address” Announces the Mac address of the unit.
013
Firmware Server IP
Address
Announces current Firmware Server IP address. Enter 12-digit new IP address.
014
Configuration Server
IP Address
Announces current Config Server Path IP address. Enter 12-digit new IP address.
015 Upgrade Protocol
Upgrade protocol for firmware and configuration update. Enter “9” to toggle between
TFTP and HTTP
016 Firmware Version Firmware version information.
017 Firmware Upgrade
Firmware upgrade mode. Enter “9” to rotate among the following three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
To Next Page
Loading...
