Grandstream Networks GHP6 Series - Ring Tones; Distinctive Ringtone; Port Settings; FXS Ports

FXS Ports
Port Settings
SIP User ID
User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar
to phone number or actually a phone number.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or different from
SIP User ID.
Password SIP service subscriber’s account password for GXW42XX to register to (SIP) servers of ITSP.
Name Any name to identify this specific user.
Profile Select the corresponding Profile ID (1/2/3/4)
Enable FXS
(TR-069)
Enable or disable the FXS port.
Forced Codec Feature
Default isYes, and active star code is02.
For enabling each codec feature, default isYes.
Default code of codec:
1. PCMU – 7110
2. PCMA – 7111
3. G723 – 723
4. G729 – 729
5. AAL2-G728-R16 – 72616
6. AAL2-G728-R24 – 72624
7. AAL2-G728-R32 – 72632
8. AAL2-G728-R40 – 72640
9. iLBC – 7201
10. G722 – 722
Ring Tones
Distinctive Ringtone
Customizes the Ring Tone 1 to 3 with associate caller ID: when selected, if caller ID
is configured, then the device will ONLY use this ring tone when the incoming call is
from the Caller ID. System Ring Tone is used for all other calls. When selected but no
Caller ID is configured, the selected ring tone will be used for all incoming calls using
the FXS port. Distinctive ring tones can be configured not only for matching a whole
number, but also for matching prefixes. In this case the symbol “x+” will be used.
For example:if configured as 617x+, Ring Tone 1 will be used in case of call arrived
from the area code 617. Any other incoming call will ring using cadence defined in
parameter System Ring Cadence located under Advanced Settings Configuration
page.
Note:If server supports Alert-Info header and standard ring tone set (Bellcore) or
distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info header
from server will be used. Bellcore rings and tones are independent from custom ring
tones.
The custom ring tones can also be specified by alert-info header, for exampleAlert-
Info: ;info=ring5
Ring Tones Configure ring cadences according to preference.
Call Waiting Tones
Distinctive Call Waiting Tones
Allow users to configure distinctive call waiting tone. The selected call waiting tone
will be used if the incoming caller ID matches the specified number
Call Waiting Tone Cadences Configure ring cadences according to preference.