Grandstream Networks GHP6 Series - Call Record; CDR record option; Port Record

Call Record
Port Record
Syslog Server
The IP address or URL of System log server. The server collects system log
information from the device.
Syslog Level
Select the GXW42XX to report the log level. Default isNONE.
The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent
based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inboundand outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components:
GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet
link is up
Print SIP in Syslog Enable or disable printing of full SIP messages in Syslog.
SIP Log Option
By default, the device will split the allowed memory for SIP file into 2 parts. Device
will create the first SIP file which is half of the allowed size, when it is full, device
will create the second file. When “SIP File Option” is set toKeep, device will keep the
SIP files when both files are full, no more new record will be stored. When this
feature is set toOverride, device will clear the first SIP file and start storing again.
Save Syslog
Save Syslog to device. 3 rotate files save syslog. Each file could save at maximum 3
MB.
Note: Scroll down to“Syslog List”and“The list for SIP log files”to download the
saved logs.
CDR record option
Enable or disable override cdr records.
By default, the device will split the allowed memory for CDR file into 2 parts. Device
will create the first CDR file which is half of the allowed size, when it is full, device
will create the second file.
When “CDR File Option” is set to Keep, device willkeepthe call records when both
files are full, no more new record will be stored.
When this feature is set toOverride, The device will clear the first CDR file and start
storing again.
Port
Enter the port id for port recording, range: 1 - max port id
Warning: This feature can only be used for debugging purpose, please delete all files
after finishing debugging.
● Start: to start port recording.
● Stop: to stop port recording.