Grandstream Networks GHP6 Series - Configuring GXW42 XX with Web Browser; Access the Web Configuration Menu

Select voice menu option 001 to enable GXW42XX to use PPPoE mode.
Firmware Server IP Address
Select voice menu option 013 to configure the IP address of the firmware server.
Configuration Server IP Address
Select voice menu option 014 to configure the IP address of the configuration server.
Upgrade Protocol
Select voice menu option 015 to choose firmware and configuration upgrade protocol. User can choose between TFTP, HTTP,
and HTTPS.
Firmware Upgrade Mode
Select voice menu option 017 to choose firmware upgrade mode among the following three options:
1) Always check,
2) check when pre/suffix changes,
3) never upgrade
Configuring GXW42XX with Web Browser
The GXW42XX series gateway has an embedded Web server that allows users to configure the GXW42XX through a web
browser. It has language support to English, Chinese, French, Russian, and Spanish.
Access the Web Configuration Menu
The GXW42XX HTML configuration menu can be accessed via Ethernet port:
To access the HTML configuration menu from the Ethernet port:
1. Follow table 4 to find the Ethernet port IP address.
2. Open a web browser, type in the IP address – for example: http://GXW42XX -IP-Address (the GXW42XX IP-Address is the
Ethernet IP address for the GXW42XX).
Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There are two default
passwords for the login page:
User Level Username Password Web Pages Allowed
End User Level user 123 Only Status and Basic Settings
Administrator
Level
admin
admin (for V1)
Random password available on the sticker
(for V2)
Browse all pages
Viewer Level viewer viewer
View all pages. Not allowed to modify the
content.
The IVR announces 12 digits IP address, you need to strip out the leading “0” in the IP address. For ex. IP address:
192.168.001.014, you need to type in http://192.168.1.14 in the web browser.