802.1X CA Certificate Upload or Delete the EAP-PEAPv0/MSCHAPv2, EAP-TLS, .pem file.
802.1X Client Certificate Upload or Delete the EAP-TLS, .pem file with both certificate and private key.
OpenVPN® Enable Enable/Disable OpenVPN® feature. Default is No.
OpenVPN® Server Address Specify the IP address or FQDN for the OpenVPN® Server.
OpenVPN® Port Specify the listening port of the OpenVPN® server. Default is 1194.
Interface type
Specify the Interface type Bridge(TAP) or Router(TUN)
The default value is TUN
OpenVPN® Transport Specify the Transport Type of OpenVPN® whether UDP or TCP. Default is UDP.
Enable LZO Compression
Enable compression on the VPN link.
Note: Do not enable this unless it is also enabled on the server
OpenVPN® Encryption
Determines encryption algorithm used for OpenVPN®.
The default value is BF-CBC – BF-CBC 128-bit default key (variable)
OpenVPN® Digest
Determines digest algorithm used for OpenVPN®.
The default value is SHA1 – SHA1
OpenVPN® CA
Click on “Upload” to upload the Certification Authority of OpenVPN®. For a new
upload, users could click on “Delete” to erase the last certificate, and then upload a
new one.
OpenVPN® Certificate
Click on “Upload” to upload OpenVPN® certificate. For a new upload, users could
click on “Delete” to erase the last certificate, and then upload a new one.
OpenVPN® Client Key
Click on “Upload” to upload OpenVPN® Key. For a new upload, users could click on
“Delete” to erase the last certificate, and then upload a new one.
OpenVPN® Client Key Password Specify the OpenVPN® Client Key password
SIP TLS Certificate
The GXW42XX series supports SIP over TLS. It has built-in private key and SSL
certificate. The user specified SSL certificate used for SIP over TLS is in X.509
format.
SIP TLS Private Key
You may also customize the SIP TLS Private Key. The user specified SIP TLS private
key used for SIP over TLS is in X.509 format.
SIP TLS Private Key Password SSL Private key password used for SIP Transport in TLS/TCP.
To Next Page
Loading...
