Key Call Features
*69 Call Return Service: Dial *69 and the phone will dial the last incoming phone number received.
*70 Disable Call Waiting (Per Call)
*71 Enable Call Waiting (Per Call)
*72
Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait for dial tone and
hang up. (dial tone indicates successful forward)
*73 Cancel Unconditional Call Forward: Dial “*73” and wait for dial tone, then hang up.
*74 Enable Paging Call: Dial “*74” and then the destination phone number you want to activate in Paging mode.
*78 Enable Do Not Disturb (DND): When enabled all incoming calls will be rejected.
*79 Disable Do Not Disturb (DND): When disabled, incoming calls will be accepted.
*87 Blind Transfer
*90 Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up.
*91 Cancel Busy Call Forward: dial “*91”. Wait for dial tone. Hang up.
*92
Delayed Call Forward: Dial “*92” and then the forwarding number followed by “#”. Wait for dial tone then hang
up.
*93 Cancel Delayed Call Forward: Dial “*93” for a dial tone, then hang up.
*98 Play registration ID: Dial “*98”, the registration ID will be announced.
*99 Provision start: Dial “*99”, the provisioning process will be triggered.
Flash/H
ook
If user hears call waiting beep, flash/hook will switch to the new incoming call. Also used to switch to a new
channel for a new call.
# Pressing pound sign will serve as Re-Dial key.
Table 6: Call Features Table (Star Code)
CONFIGURATION GUIDE
Configuring GXW42XX via Voice Prompt
DHCP Mode
Select voice menu option 001 to enable GXW42XX to use DHCP.
STATIC IP Mode
Select voice menu option 001 to enable GXW42XX to use STATIC IP mode, then use option 002, 003, 004, 005 to set up IP
address, Subnet Mask, Gateway and DNS server respectively.
PPPoE Mode
To Next Page
Loading...
