NAT
Traversa
l
Shows type of NAT the GXW42XX is connected to via its WAN port. It is based on STUN protocol.
Port Status
Displays relevant information regarding the individual FXS ports.
Call Features Status
Displays relevant information regarding the Call Features.
Network Settings for Service Interface
IP Address Mode for Service
Interface
Choosehow the IP address obtained on the gateway for Service Interface
● DHCP (default)
● PPPoE
● Static IP
Preferred DNS Server Enter the preferred DNS server that should be used for DHCP and PPPoE.
DHCP Settings
Host name (Option 12)
Specifies the name of the client. This field is optional but may be required by
Internet Service Providers.
DHCP Domain
Specifies the DHCP Domain. This value is optional but may be required by Internet
Service Providers.
Vendor Class ID (Option 60)
Used by clients and servers to exchange vendor class ID.
Default is "GXW4200"
Client Circuit ID (Option 82)
Used to Encode an Agent-Local identifier of the circuit, Circuit ID sub-option is
supposed to include information specific to which circuit the request came in on.
Remote Agent ID (Option 82)
The relay agent may use this field in addition to or instead of Agent Circuit ID field.
The remote ID sub-option carries information relating to the remote host end of the
circuit
PPPoE Settings
PPPoE Account ID Configures PPPoE Account ID.
PPPoE Password Configures PPPoE Password.
PPPoE Service Name Specifies a name for PPPoE.
To Next Page
Loading...
