Grandstream Networks GHP6 Series - Status; System Info; Network Status

STATUS: Displays the network status, account status, software version and MAC-address of the phone
MAINTENANCE: Basic settings such as basic network, date and time settings, and web/SSH access settings can be set
here.
PROFILE – AUDIO SETTINGS: DTMF, Vocoder, and Analog Line settings can be configured here for each port.
Additional functions available to administrators are:
MAINTENANCE: Full settings for network, upgrade/provisioning, TR-069, Security and Syslog.
ADVANCED SETTINGS: To set advanced Ring Tongs, FXO Failover, and System Features.
PROFILE X: To configure each of the SIP accounts.
FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
Status
System Info
Product
Model
Contains the product model info.
Part
Number
Product Part Number.
Softwar
e
Version
Program: This is the main software release. This number is always used for firmware upgrade. Current version is
1.0.7.2
System
Up Time
Shows system uptime since the last reboot.
System
Time
The time according to NTP server.
Service
Status
Shows the status of the VOIP applications.
Network Status
MAC
Address
The device ID in hexadecimal format. This is needed for Internet Service Provider troubleshooting. The MAC
address will be used for provisioning and can be found on the label on original box and on the label located on the
bottom panel of the device.
IP
Address
Mode
Shows the current IP mode.
IP
Address
Shows IP address of GXW42XX
Subnet
Mask
Shows Subnet Mask of GXW42XX.
Gateway Shows Default Gateway of GXW42XX.
DNS
Server
Shows DNS Server of GXW42XX.