Grandstream Networks GHP6 Series - Upgrade and Provisioning; Lock Keypad Update; Firmware Upgrade and Provisioning

is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User Name The user name needed to authenticate with the HTTP/HTTPS server.
HTTP/HTTPS Password The password needed to authenticate with the HTTP/HTTPS server.
Always send HTTP Basic
Authentication Information
Default isNo. If set to Yes, device will send configured user name and password
within HTTP request before server sends authentication challenge.
Upgrade via Allows users to choose the firmware upgrade method via TFTP, HTTP or HTTPS.
Firmware Server Path
IP address or domain name of firmware server. That URL of the server that hosts the
firmware release. The default server is:fm.grandstream.com/gs
Config Server Path
IP address or domain name of configuration server. The server hosts a copy of the
configuration file to be installed on the gateway. The default server
is:fm.grandstream.com/gs
Firmware File Prefix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single directory
on the configuration server. If configured, only the configuration file with the
matching prefix will be downloaded.
Config File Postfix
This field enables user to store different configuration files in one single directory
on the configuration server. If configured, only the configuration file with the
matching postfix will be downloaded.
Allow DHCP Option 43 and Option 66
to Override Server
If set to “Yes”, configuration and upgrade server’s information can be obtained using
DHCP option 66 from DHCP server. This option specifies the URL of the TFTP server.
Note:If DHCP Option 66 is enabled, the gateway will attempt downloading a
configuration file from the server URL provided by DHCP, even thoughConfig Server
Pathis left blank.
Enable Using tags in URL
Allows users to configure variables on the configuration server path to differentiate
the directories on the server.
Example:When provisioning, a user can define the mac address and IP address
when sending the HTTP Send request link in the following form
"192.168.5.96:8060/?mac=[MAC]&lan_ip=[IP]", the link will look like this
example:http://192.168.5.99/mac=000b89a9064&lan_ip=192.168.5.99/cfg.xml
Default Value is "No".
Download and Process All Available
Config Files
By default, the device will provision the first available config in the order of cfgMAC,
cfgMAC.xml, cfgMODEL.xml, and cfg.xml (corresponding to device-specific, model-
specific, and global configs). If this option is enabled, the GSC3570 will inverse the
downloading process to cfg.xml > cfgGSC3570.xml > cfgMAC.bin > cfgMAC.xml.
The following files will override the files that have already been loaded and
processing.
The default value is set to "No"
Note:Support for the new override config file option as “cfgMAC_override.xml” file
has been added to the GXW42XX Model.
Additional Override DHCP Option Allow users to configure additional DHCP Options to be used for the firmware server
instead of the configured firmware server or the server from DHCP Options 43 and