System
Features
Disable
Direct IP
Call
Disables the Direct IP Call function. Default is “No”. If set to “Yes” direct IP-to-IP calling will not be supported.
Inter-
port
Calling
With this feature enabled, when the FXS port is unregistered, users can use the same extensions of the FXS
port for inter-port dialing instead of dialing ***7xx.
Disable
SIP
NOTIFY
Authenti
cation
Disables challenging SIP NOTIFY reboot and resync messages.
Disable
Voice
Prompt
Disables the voice prompt configuration. Default is “No”. If set to “Yes” accessing integrated voice menu will be
impossible.
IVR
Languag
e
Choose English, Chinese, Russian or Spanish.
Upload/
Delete
Languag
e Pack
Upload/delete language pack.
Display
Languag
e
Choose language for LCD display.
Prompt
Dial Tone
Code
Simulates an analog PBX where a code is required to dial an outside line.
Country
Specific
Deploym
ent
This feature allows to customize the tones to match the country’s specifications. There are 5 supported
options: None (default), USA, China, China ITSP, and Germany.
Automati
c Reboot
Default is No. When “Yes, reboot every day” or “Yes, reboot every week” is checked, user can specify “Hour of
the day (0-23)” or “Day of the week (0-6)”. Default time is Monday 1AM.
LED
Pattern
This feature allows users to customize LED patterns. There are three patterns to choose from:
Pattern A: Onhook: OFF; Offhook: On; Voicemail: Blink
Pattern B: Onhook: On; Offhook: Off; Voicemail: Blink if phone onhook
Pattern C: Onhook and Registered: On; Offhook: Blink; Voicemail: Blink 1sec ON/1sec OFF
Table 9: Advanced Settings
To Next Page
Loading...
