Added feature “Replace Beginning ‘+’ with 00 in Caller ID. [Replace Beginning ‘+’ with 00 in Caller ID]
Added support to display call feature status on Web UI. [Call Features Status]
Increased TX Gain and RX Gain range from (-6dB – 6dB) to (-12dB – 12dB). [Gain]
Added support to allow “Name” configured under “FXS Ports” for ports that are part of the active hunting group to take
effect. [FXS Name]
Firmware version 1.0.7.8
No major changes.
Firmware version 1.0
Change Feature “Validate Server Certificates” default value to No. [Validate Server Certificates]
Firmware version 1.0.7.3
Added feature “Enable SIP OPTIONS/NOTIFY Keep Alive”. [Enable SIP OPTIONS/NOTIFY Keep Alive]
Added feature “Call Record” to download the call history records from Web GUI. [Call Record]
Firmware version 1.0.5.43
Added feature Conference Party Hangup Tone. [Conference Party hangup tone]
Added feature Inter-port Calling. [Inter-port Calling]
Added feature LED Pattern. [LED Pattern]
Added feature Reply to ICMP. [Reply to ICMP]
Added feature Validate Server Certificates. [Validate Server Certificates]
Added feature Load CA Certificates. [Load CA Certificates]
Added feature Disable User Level Web Access. [Disable User Level Web Access]
Added feature Disable Viewer Level Web Access. [Disable Viewer Level Web Access]
Added feature Randomized Automatic Upgrade. [Randomized Automatic Upgrade]
Added feature Virtual Network Interface. [Network settings for Management Interface]
Added feature Disable Voicemail Reminder Tone. [Disable Voicemail Reminder Tone]
Added feature Disable # as Redial Key. [Disable # as Redial key]
Added feature Ringing Frequency. [Ringing Frequency]
Added support for call waiting tone to be repeated while the caller is still calling. [Call Waiting]
Added support to play stutter tone when call feature under Profiles → Call Features Settings is enabled. [Enable Call
Features]
Firmware version 1.0.5.36
Added support for Allow Auto-Dial Config Per Port. [Allow Auto-Dial Config Per Port]
Added RTCP support. [RTCP]
Added Custom Certificate support. [Custom Certificate]
Added support for HTTPS server based on TLSv1.2.
Firmware version 1.0.5.30
No major changes.
Firmware version 1.0.5.28
Added option to specify the priority for caller ID display [Caller ID Display]
Added option to save syslog locally. [Save Syslog]
To Next Page
Loading...
