CLIENTS MANAGEMENT
Connected clients to different network groups can be shown and managed from a single interface.
Users can access clients list from GWN7000’s Web GUI -> Clients to perform different actions to wired
and wireless clients.
GWN7000 Enterprise Router with its DHCP server enabled on LAN ports level, will assign automatically an
IP address to the devices connected to its LAN ports like a computer or GWN76xx access points and to
wireless clients connected to paired GWN76xx access points.
Figure 19: Clients
Click on under Actions to check the client’s status and modify its configuration.
Status
This page allows to check user’s basic information such as MAC address, IP address, which Network group
does it belong to, and to which access point if it’s a wireless client, as well as Throughput and Aggregate
usage.
To Next Page
Loading...
