GXP17xx User Guide
Version 1.0.1.119
Configuration via Keypad
To configure the LCD menu using phone's keypad, follow the instructions below:
• Enter MENU options: When the phone is in idle, press the round MENU button to enter the
configuration menu.
• Navigate in the menu options: Press the arrow keys up/down/left/right to navigate in the menu options.
• Enter/Confirm selection: Press the round MENU button or “Select” softkey to enter the selected option.
• Back: Press “Back” softkey to exit to the previous menu.
• Return to Home page: In any menu, press “Back” softkey to return to idle screen.
Note: The phone automatically exits MENU mode in these situations: An incoming call when the phone is
off hook or the MENU mode if left idle for more than 60 seconds.
The MENU options are listed in the following table.
Table 8: Configuration Menu
Call History sub menu includes the following options:
• Local Call Log.
Displays answered calls/dialed calls/missed calls/transferred calls.
Press “Clear All” to clear all local call history.
• Broadsoft Call Log.
Displays Broadsoft call logs.
Status sub menu includes the following options:
• Network status.
Displays the MAC address, IP information (DHCP/Static IP/PPPoE), IPv4
address, IPv6 address, Subnet Mask, Gateway, and DNS server.
• Account status.
Shows the registration status of each account.
• System Status
Displays the hardware version, part number, software version, IP geographic
information and special features.
Phone Book sub menu includes the following options:
• Local Phonebook
• Local Group
• Broadsoft Phonebook
To Next Page
Loading...
Need help?
General
