➢ Press SEND button to dial out.
• Via Phonebook: Dial the number from the phonebook.
➢ Press Contacts button.
➢ Under Contacts, enter Local Phonebook/ Broadsoft Phonebook/LDAP directory using the
navigation arrow key.
➢ Select the contact you would like to call using the navigation arrow key.
➢ Press SEND button to dial the selected contact.
• Speed Dial from Line Key: Dial the number configured as Speed Dial on Line Key.
➢ Go to phone's Web GUI→Settings→Programmable Keys→virtual Multi-Purpose Keys, configure
the Line’s Key Mode as Speed Dial. Select the account to dial from, then enter the Name and User
ID (the number to be dialed out) for the Line Key. Click on "Save VPK" at the bottom of the Web
GUI page.
➢ Directly press the Speed Dial key to dial out.
• Call Return: Dial the last answered call.
➢ Go to phone's Web GUI→Settings→Programmable Keys→virtual Multi-Purpose Keys, configure
the Line's Key Mode as Call Return. Select the account to dial from, no Name or User ID has to be
set on for Call Return.
➢ Directly press the Call Return key to dial out.
• Via Paging/Intercom.
➢ Take handset off hook, or
o Press Speaker button,
o Press Headset button with headset plugged in,
o Press an available LINE key to activate speaker,
➢ You shall hear dial tone after one of the previous manipulation.
➢ Press MENU button to switch the call screen from "DIAL" to "PAGE",
➢ Enter the number,
➢ Press SEND key or # to dial out.
Notes:
• After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND or # key to override the No Key Entry
Timeout.
• If digits have been entered after handset is off hook, the SEND key will works as SEND instead of
REDIAL.
• By default, # can be used as SEND to dial the number out. Users could disable it by setting "User # as
Dial Key" to "No" from Web GUI→Account X→Call Settings.
• If the SIP Server/PBX supports Paging/Intercom and has feature codes set up already, users do not
necessarily need toggle to paging mode in the call screen. Simply dial the feature code with extension
as a normal call.
To Next Page
Loading...
Need help?
General
