Special
Softkeys
(only
when
device
integrate
d with
UCM6xxx
)
Call Parking: Please refer to UCM6xxx Online User Manual for more information
CallPark
When the phone dials out, the Call Park softkey will display on screen. To park the call, press the “CallPark”
softkey and select a green MPK to park the call on available parking lot.
Features: On UCM, users need to enable “Keep-alive” option for the registered account.
Features
When enabled, Do Not Disturb, Call Forwarding and other call features can be used via the local feature codes
on the phone. Otherwise, the provisioned feature codes from the server will be used. User configured feature
codes will be used only if server provisioned feature codes are not provided. And once feature codes are
configured, either via server provisioning or local setting, a softkey named “Features” will show on the LCD
screen.
Table 11: LCD Display Definitions
Network Status.
OFF – Network connection is up
ON – Network connection is down
DND Status.
OFF – Do Not Disturb disabled
ON – Do Not Disturb enabled
Call Forward All Status.
OFF – Call Forward All feature disabled
ON – Call Forward All feature enabled
Call Forward Busy Status.
OFF – Call Forward Busy feature disabled
ON – Call Forward Busy feature enabled
Call Forward No Answer Status.
OFF – Call Forward No Answer feature disabled
ON – Call Forward No Answer feature enabled
Missed Call Status.
OFF – No missed call
ON – New missed call
Handset Status.
OFF – Handset is not in use
ON – Handset is in use
Headset Status.
OFF – Headset is not in use
ON – Headset is in use
Microphone MUTE Status.
OFF – No muted
ON – Muted
Bluetooth Status. (GXP2130v2/GX2140/GXP2160/GXP2170/GXP2135)
OFF – Bluetooth icon disappears
ON – Bluetooth icon appears
Paired – Bluetooth icon turns bright
USB Status. (GX2140/GXP2160/GXP2170)
OFF – No USB connection
ON - USB connected
Incoming Call.
The current call is an incoming call
Outgoing Call.
The current call is an outgoing call
To Next Page
Loading...
