802.1xPassword
This field is for inputting the password for the 802.1x EAP-MD5 mode.
TETHERING & PORTABLE HOTSPOT
The GXV3275 can be served as a Wi-Fi access point for other devices to connect to wireless network if
hotspot is turned on.
1. Turn on hotspot by tapping on "Portable Wi-Fi hotspot". Icon will show on the top status bar of
the GXV3275.
2. Tap on "Set up Wi-Fi hotspot" to configure network SSID, security type and password. Please make
sure the password has at least 8 characters. Otherwise, users won't be able to save the setting.
3. On the other device that needs Wi-Fi access, turn on Wi-Fi, look for the SSID of the GXV3275 hotspot
and enter authentication information to get connected.
Figure 4: GXV3275 Wi-Fi Hotspot
To Next Page
Loading...
