Contacts Storage Status
The GXV3480 default maximum contacts storage is up to 2000, while the GXV3470 and GXV3450 is up to 1000.
To check contact storage status, tap on More on the upper right corner of the contacts screen
to bring up contacts
options, scroll down and select “Storage Status”.
Figure 116: GXV3480 Contacts – Storage Status
Diagnostics
Diagnostics app provides visual information about the device’s interfaces connection, Network and accounts status. Users can
also perform an Audio diagnostic test to check if the built-in speaker is working.
Users can access the Diagnostics app and press on Start to check the phone’s status.
General Status:
Note
Users could increase the number of maximum contacts storage to more than the default value. Users may access the phone
through SSH and change the P value P1688 to another number (<=10000) to increase the default contacts storage. In this case,
if users increase this default P value, the phone resource will be cost, and the phone performance will be slower.
To Next Page
Loading...
