HT70X User manual
Version 1.0.9.4
The device ID, in HEX format. This is very important ID for ISP troubleshooting.
The Mac address will appear in this place. The MAC address will be used for
provisioning and can be found on the label coming with original box and on the
label located on the bottom panel of the device.
This field shows the IP address of the HT70X.
This field contains the product model info.
This field shows the hardware revision of the unit and the part number.
Program: This is the main software release. This number is always used for
firmware upgrade. Current release is 1.0.9.4. Boot and Loader are seldom
changed.
Bootloader: current version is 1.0.0.6.
Core: current version 1.0.9.4.
Base: current version is 1.0.9.4.
CPE: gs_cpe version number information.
Shows system up time since the last reboot.
Indicates whether the PPPoE connection is up if the HT70X is connected to DSL
modem.
This filed indicates the type of NAT connection used by the HT70X.